Multigrip
The Multigrip rivet is a fastener that offers the possibility of working in a wide range of thicknesses. A single rivet can be used to replace several standard thickness references, thus reducing rivet inventory.
Suitable for working with plastics and thin sheet metal and commonly used as a repair rivet.
SELECT MATERIAL AND HEAD TYPE
Ø
3.2 - 6.4 mm
Versatility. A single rivet can be used to replace several rivets of standard thickness reducing inventory.
Mandrel retention.
Good filling of the drill hole. Allows to compensate for uneven, misaligned, oversized bores.
Large support area on the hidden side, distributing the load and clamping force.
Metal back plates,
Automotive,
Industrial and commercial vehicles,
Bodies,
Electronics,
Air conditioning and heating,
Construction,
Metal industry,
Metal furniture,
Appliances,
Staircase manufacturing
| Head material | Type | Corrosion conditions | Temperature resistance | Appearance |
|---|---|---|---|---|
| Alu/Steel/Stainless | Lacquering (epoxy or acrylic paint) | Slight | Moderate |
|
| Steel | Passivation zinc plating | Slight | Moderate |
|
| Steel | Passivation zinc plating with sealing | Moderate | Good |
|
| Steel | Zinc-iron coating | Moderate | Moderate |
|
| Steel | Zinc-nickel plating | Severe | Good |
|
| Steel | Special zinc-nickel coating | Very severe | Good |
|
| Aluminum or Steel | Delta seal | Moderate | Moderate |
|
| Aluminum | Aluminum anodizing | Severe | Moderate |
|
| Inox | Stainless steel passivation | Very severe | Good |
|
| Type | Material | Head style | |||
|---|---|---|---|---|---|
| Designation | Body | Mandrel | Dome | Large | Countersunk |
| MULTIGRIP | Aluminum | Steel |  |
|
|
| Aluminum | Inox | |
|
|
|
| Steel | Steel | |
|||
