BSR Speed Rivets
BSR Speed Rivets are designed for fast and precise joining of all types of materials; metals or plastics, composite materials and electronic components.
They are supplied preloaded in paper strip and are placed using a single mandrel repeat system.
SELECT MATERIAL AND HEAD TYPE
Ø
3.2 to 4.8 mm
Fast assembly cycle
The assembly cycle time does not exceed 2 seconds and up to 60 rivets can be set per minute.
Does not deform surfaces once riveted (painted, enameled, etc.).
Conical end to facilitate the embouchure in the drill hole.
Radial expansion during installation ensures an excellent filling of the drill avoiding dynamic stresses.
Automotive,
Electronics and electrical engineering,
Furniture,
Appliances,
Staircase manufacturing ,
Light metallic constructions
| Head material | Type | Corrosion conditions | Temperature resistance | Appearance |
|---|---|---|---|---|
| Alu/Steel/Stainless | Lacquering (epoxy or acrylic paint) | Slight | Moderate |
|
| Steel | Passivation zinc plating | Slight | Moderate |
|
| Steel | Passivation zinc plating with sealing | Moderate | Good |
|
| Steel | Zinc-iron coating | Moderate | Moderate |
|
| Steel | Zinc-nickel plating | Severe | Good |
|
| Steel | Special zinc-nickel coating | Very severe | Good |
|
| Aluminum or Steel | Delta seal | Moderate | Moderate |
|
| Aluminum | Aluminum anodizing | Severe | Moderate |
|
| Inox | Stainless steel passivation | Very severe | Good |
|
| Type | Material | Head style | ||
|---|---|---|---|---|
| Designation | Body | Dome | Large | Countersunk |
| SPEED RIVET | Aluminum |  |
|
|
| Steel | |
|
||
| Inox | |
|||
